New this Week! January 23rd, 2012

New this week at my Silhouette die cut store! 

More cards! 

(designs may not be up in the store at the beginning of the week, but they have been uploaded to the queue.  Watch for them as the queue rolls out the new designs.)

Silhouette "How did you do that?"

I'm just popping in today with a few little hints for using your Silhouette machine.  If you are new to the machine, or if you are afraid to cut detailed projects...I have some suggestions for you, so that you can succeed in doing this in a clean easy way. You can do this!  I promise!

When I first started using my Silhouette, I thought that it couldn't cut thick cardstock like Bazzill...but...that was because I had my settings all wrong. I was frustrated to say the least. Oh...and one other minor thing was effecting my results...and this is where I'll have to let you in on my dirty little secret...I actually purchased my Silhouette SD machine used. Gasp! I know...I design for them...I should have bought a new machine.  However, I'm very budget aware...some may call that cheap...I call it being frugally smart.  (All my friends who know me are laughing...and shaking their heads up and down...because they know I like to buy a lot my things used...like clothing, home improvement stuff...and what have you...it's just me.) I finally discovered that it wasn't the machine that was causing my frustration...it was my blade... it just wasn't sharp. Also...my mat was well-used and almost out of "sticky." So I was set up for a bad experience from the get go.  But...once I changed the blade, and got a new mat...I was a very happy camper, because my machine turned into a slick system...cutting everything like butter.

So my point with all of that above stuff...make sure you are cutting with a sharp blade, and a sticky mat free of debris. Otherwise, you will run into the same frustrations that I did.  It makes sense, doesn't it?

Next thing you need to be aware of...If you are using thick paper or card stock to cut a detailed design...which I like to do because it strengthens the design, screw on your pink cutting cap (the 0.3mm one). That's the cap designed for cutting heavier papers.  After the pink cap is nicely attached...then go to your Silhouette software.  Make sure that you set up your machine so it knows you are cutting heavy cardstock...in the settings menu on the right side, select the (heavy 80lb.) This will automatically adjust your paper thickness to 33, and your speed to 3. I did a test cut on one of these boxes with my heavy cardstock at these settings.  It wasn't quite enough for the detail in this design...it cut...it just didn't cut all the way through in a few areas, so the designs didn't entirely "release" when I lifted it off the mat. So I made a few small adjustments.  I lowered the speed to 2. It's always a good idea to lower the speed when you get into a detailed design... AND I put the settings on "double cut."  That setting does just that. It cuts the design twice as it goes along.  By making these minor little adjustments, the results were perfect.  The design released effortlessly from the mat, having cut every little detail the way it was intended.  Now that makes me happy...because if you are familiar with any of my designs...you will quickly realize that I love little details.

This week I have several new designs that have loads of detail in them...don't be afraid to try these!  They take a little time for the machine to cut, but the machine does all the work...you can choose what you want to do while the machine wizzes and whirrs around on the paper...be that folding laundry, surfing on the net, talking on the phone, or eating a bowl of ice cream. Or...if you want...you can stair in amazement as the machine "does it's thing" until the design has been cut.

Creative Team Member spotlight Jennifer Ingle

Cuckoo Clock Card created with Cuckoo clocks stamp set by Samantha Walker for Unity Stamp Co. Papers are the Kokeshi collection by Samantha Walker for Creative Imaginations.

I have the privilege of sharing the work of Jennifer Ingle with you today. She is such a fun spirited member of my creative team. Her designs always have an innovative twist.  She not only works with paper...but also fabric in her one of a kind art dolls, which she affectionately names.  I asked Jennifer a few questions about herself and here is how she responded:

Ice Cream card was created with "The Sweet Life" Stamp set by Samantha Walker for Unity Stamp company. Papers are from the Heidi collection for Creative Imaginations.

Q.  What is your favorite Technique?

That's a hard question, but I think lately it has really been paper piecing.  I love cutting out the tiny pieces from various papers and putting them back together like a little puzzle and the results are just too fun!

Butterfly card was created with "Be You" Itty Bitty by Samantha Walker for Unity Stamp Company. Paper is from the Blossom collection by Samantha Walker for Creative Imaginations.

Q.  Where did you learn to design?

Well, I've been making stuff since I developed fine motor skills, pretty much, so I'm not sure if I can define where I learned to design.  I pick up new techniques by looking at the art of others, working with new supplies, and coming up with ideas and then trying to find a way to make them work.  I am constantly learning in every aspect of my life and since my creative life is such a huge part of who I am, learning and growth is something I am always striving for.

Flower card was created with paper and stickers from the Blossom collection by Samantha Walker for Creative Imaginations.

Q.  What influence your design choices?

Product.  I think that might be a horrible answer, but it's true!  When I get a new product in my hand, be that a fresh pack of paper clay, some great new patterned papers, a set of stamps, or a vial of vintage buttons from the antique shop it generally spurs me on to create something!  I am pushed by my desire to try out new things and make them work in my own way.

Doll was created with Wanna Be a Cowboy fabric collection by Samantha Walker for Riley Blake Designs

Q.  Who are your artsy inspirations?

Well, she will kill me for saying this, but Eva Dobilas is an amazing card maker and I am constantly inspired by her work.  Becky Shander  and Terry Stevens are wonderful mixed media artists and Rachel Wetzel and Abi Monroe are some really inspiring art doll artists.  I could keep going, as there are so many fabulous people out there creating so many fabulous things!  

Organdy Ribbon card was created with the Heidi collection by Samantha Walker for Creative Imaginations.

Q.  What do you enjoy doing besides crafting?

There is stuff other than crafting???  HA!  No, really, I love to read and I collect children's literature.  I like to make cupcakes when I have time and I absolutely LOVE hanging out with my fabulous Hubbums and my two beautiful black labs, Maggie and Thatcher. 

Ear rings were created with shrinky dink film. They were stamped with the Kokeshi stamp set by Samantha Walker for Unity Stamp Company.

Sympathy card was created with Encompassed Grace stamp set by Samantha Walker for Unity StampCo.

Jennifer has such a fun blog as she writes from the heart and her delightful personality shines through.  You will have to visit her blog frequently.

Rag Quilt Tutorial

I have photos for most of the steps and will verbally walk you through the other steps.

Time investment: approximately 8 to 12 hours.

Step one: Cut 42 squares of lightweight batting into 6 inch squares.

Step 2: Cut 84 squares of high quality flannel into 7 inch squares.

Step 3: Sandwich the batting between two squares of the flannel so that it leaves a 1/2 inch gap all the way around the batting, and the pretty sides show when your "sandwich" is closed.

Step 4: Sew an X in the middle of the flannel square so that the sandwich is "quilted together." Repeat on all 42 squares.  

Hint: The first rag quilt I did, I mixed the front and back pieces so that they were not the same, so when I laid out my quilt, I had to think of what the front and back side would look like.  This created quite a conundrum. I had to do a lot of flipping of fabric and flipping in my brain.  So I got smart and decided the next on that I did (like this pink one) that I would do the front and back side of the quilt with the same fabric so that I wouldn't have to worry about both sides as I lay out my squares.  It would also be cute to do solid on one side and patchwork on the other side.  

Step 5: lay two of your X quilted squares on top of each other. 

Step 6: sew them together on one side, leaving a 1/2 inch seam. 

Step 7: Now add a third square and sew so that the seam appears on the same side. 

Continue this process until you have a row of 7 squares.  

Step: 8 Now make 5 more rows of 7 squares for a total of 6 rows. 

Step 9: Now seam together the rows so that the seam appears on the same side as each square seam. You should now have your basic blanket with 6 rows of 7 squares.

Step 10: The Binding...you can do this several ways. You can simply leave 1/2 inch raw seam around the quilt and sew the seam twice for good measure. Or you can choose a fancy edge like the triangle edge I did for this quilt. (I know there is an official name for this...but I am not a quilter {yet} so I don't know the specific term.)   

Triangle edge: cut 52 6-inch squares of flannel. Fold each square in half diagonally.

Now fold each triangle in half again creating a smaller triangle.  

 Your triangle will have an open end.  Use that open end to insert the neighboring triangle. 

 Evenly space a row of 12 triangles so that they expand the same space as the top of the quilt, and secure with pins.  Make a second set of 12 pinned triangles to expand the bottom of the quilt. Now make two more rows of 14 pinned triangles to expand the same length as the sides.  

Sew through the triangles with a 1/2 inch seam on the edge.

Attach your triangles to the quilt...now I opted to reverse the side where my raw seam would appear...so that there was a fluffy edge on the opposite side of the quilt.  You can opt to keep all of your raw seams on the same side though.  To attach, lay flat on the quilt and line up your straight edges. Make a 1/2 inch seam to attach the triangles to the quilt. When you have attached all 4 sides, go around on that 1/2 inch seam one more time with your sewing machine for good measure.  

Clipping your seams:  Now that your quilt is all attached and sewn together, you are left with an ugly bunch of half inch raw seams. We are going to make them look fantastic by cutting into the seams with 1/4 inch snips that go nearly all the way to the thread of your seam. Do this step carefully through all the seams, just continue to snip in 1/4 inch increments. Be very careful not to snip through the thread on your seams...just cut up to that point. If you do happen to catch a thread with your scissors...just bring the quilt to your sewing machine, and seam that edge again. 

Washing the Quilt to "rag" it: When the entire quilt has the raw edges snipped (including your binding seam edge) then you will put the whole quilt into your washing machine.  Do not wash this with anything else in the machine at the same time, unless you want the other items to be lint and thread ridden.  After you wash the quilt, empty the lint trap in your dry. That step is very important, as you will fill your lint trap when you put your quilt in the dryer until completely dry. Remove from dryer and enjoy your fun fuzzy rag edges.  

I tried a different binding than I did last time I did one of these rag quilts.  I really like the way it turned out.  I'm still not sure if I should have just left all the rag edges on the same side, but I opted to do a reverse rag edge with the binding so that the ragged edge showed on the "clean" side.  I may try it the other way around next time.  I still like how this turned out, though.

Pinch me...I think I'm dreaming!

Last June I was offered the opportunity of a lifetime...to create a line of home decor products.  Did I just say that out loud?  REALLY...that's HUGE! I have been over the moon about it for months...but cautiously, as I just didn't know how it was all going to go down. I worked many late nights and weekends to pull off the magnitude of this project, and today, I got to see it come to fruition.  My samples were ready to view!  I had no idea what to expect, and so I was floored to see it all come to life. I quickly snapped a few pictures to give you a preview of what we created. I cannot take all the credit as Mark and Kristen Tuttle shopped overseas for what my artwork would be laid into...wooden frames, clocks, marble coasters, frames, wall tins, magnets, wood wall art and more! So together, their choices of products combined with my art...we came up with this:

This is just a sneak peek at the products that will start selling in January at the gift market trade show in Atlanta.

 The Pear stacked wood prints are among some of my favorite pieces in this collection.  Actually...there are three collections if you break it down into Pears, Owls and Flowers, and black and white.

 This is just a small sampling of the owl and flower collection.  These are prints done on metal tins.

This is a close up of some of the flower designs...

 This is a close up of some of the owl prints.  

I'm crazy excited to see this go to the next step...and that is being presented in the VIP International booth in Atlanta at the trade show in January.  Here's to hoping this line will see much success!

Guest Designer, Eva Dobilas...WOW!

I am thrilled to be featuring guest artist, Eva Dobilas.  She is actually the reason why I am designing stamps for Unity Stamp Company.  Eva was the one who introduced me to Angela the owner of Unity.  Eva's designs caught my eye when she used my birdhouse Silhouette die to create a beautiful project I featured her on my blog a few months back.  It is a truly amazing project, and worth looking at again if you haven't had a chance to see it.  What I like about Eva's designs is that she has such a knack for creating such beautiful color combinations, and adding cute little details.  I'm sure you will see what I mean after you look at these WOW cards.  Eva used a combination of Stamps from my collections at Unity, and digital die downloads from the Silhouette machine store.  Thanks, Eva for being the featured artist on my blog...you are incredible!

What got you into paper artistry?

The first time I bought a stamp was about 18 years ago, as a stay at home mom trying to make a little cash and selling cards at school shows.  I sold Christmas cards and bookmarks and I was hooked on embossing, stamping, and coloring.  13 years ago a friend invited me to a scrapbook party, and I started working with pretty papers and layouts, and till today I blame her for all the hoarding I do…hehehe

What is your favorite technique?

I don’t really have a favorite technique; instead I am a lover of all different techniques and love to try anything new that attracts me.  I love Splitcoaststampers for all their challenges for the techniques.

What do you think makes your work unique?

That is a hard question to answer, but I will try my best.  I love the pretty feminine look, semi distressed more with inks.  But I also love the grungy look, although I tend to pretty that up, too..hehehe.  Somehow I manage to add feminine touches to most everything.  Love ribbons, still on the crinkled ribbon craze as you can see from my cards.

What inspires you?

I get inspiration from other artists, blogs I visit, and Etsy is a great site, their daily e-mails sometime trigger the best work out of me.  But really I am mostly inspired by colors and sketches.

Besides crafting...tell a little about yourself... and anything else that might interest readers.

Other than the love of stamping/crafting, I also have 4 boys in my life, my wonderful partner, Michael, who loves me almost unconditionally and I just love him for that, my amazing son, who I am totally crazy about even though he is 20 already and 2 sweet kitties, Fuzzy and Louis, who make me laugh and feel loved every day I spend with them.  I love my life with all the curves and ups and downs it provides me and try to carry my own sunshine wherever I go, at least most of the time and love to help and inspire others to do the same.

The Ins and Outs of Sourdough

Let me just start out by saying...this is going to be a long post...there is just no other way to teach about the process of making sourdough bread. Sourdough is fun to do, and once you get the knack, it is not time consuming to make, you just have to get used to the process. I have been wanting to do this post for over a year...but I am just now getting around to doing it. You will understand if you start reading...as there is so much information, which has taken me trial and error to perfect, and reading this and that, then reading more, and reading even more. My hope is to pack a lot of information here that you will just need once place to gather all that you will need to know to make this process go smoothly.
Okay...here we go!
I have always loved sour dough bread...part of that is due to growing up in the Bay Area in California and being able to purchase real San Francisco sourdough bread in the stores. There is nothing like it...unless...you find a bakery that will make a bread with real sourdough starter and no additives, dough enhancers or other things that fluff up the bread in a very unnatural way. Don't get me wrong...fluffy bread has its place...it's just not with sourdough bread. True sourdough should be crusty and bubbly on the outside with a chewy soft center...that is not too soft, nor cake like, and a robust sourdough flavor that does not overwhelm. It should be made with minimal ingredients to create a true old world flavor.
There is also so much you can do with a sourdough starter besides French bread, so I have added a few of my family's favorites at the end of this post.

Square one: making the sourdough starter
No one likes to be in square one, that is why some people skip this step completely and buy a starter from a reputable source...there are many places online where good starters can be purchased. One such source is King Arthur Flour where you can purchase 1 oz. of starter that comes with a pedigree for $6.95 plus shipping.
Alternatively, you can do it the old-fashioned way and catch wild yeast. It's not as hard as it sounds, it just takes time, and lots of it. Don't worry, it won't take much of your time, it just takes the flour time to catch yeast. Don't plan on making bread today...but plan on it two weeks from today, or next month.
In this first step, choose a place for your starter to live. A starter likes a home bigger than they will become, that allows air to flow in and out. A starter gets angry in a small airtight container. I like to use a crock and remove the silicon ring. I bought mine at Target. It was meant to be a sugar canister. Those work great as homes for starters.
Next, measure out a cup of water and a cup of unbleached bread flour, mix it well, place it in its home...and that's it. Yup, the whole darn recipe for starter...so what's so hard about that? Okay...well, at first there is no yeast, at this point, your starter is useless. So in this crock or bowl, you are going to try to "catch" some wild yeast. You don't need to wave it around your kitchen, then quickly put the lid back on...the neighbors might see you doing this through your window and that could be pretty hard to explain.
This is where the time and patience comes in. Now every day for the next two weeks you are going to dump out half the starter and let it go down the drain (emotionally, this is the hardest part for me, as I hate wasting food--if you can find a use for this unready starter, then kudos to you!) Then you will feed your start by adding half a cup of water, and half a cup of unbleached bread flour. Mix it up, then leave it on your counter in a nice warm spot (70-80 F) until the next day. Repeat this step anywhere from 5 days to two weeks. If you forget a day or two...don't worry, just pick up where you left off, and toss half the starter then add your flour and water. Soon, you will start to notice your starter bubble a bit. This is a very good thing! You may even start to notice a sour smell before feedings, and a yeasty (beer-y) smell a few hours after feedings. The more you smell this, the closer you are to success. You have reached true success when your bubbles become frothy a several hours after feedings--this is not just bubbly, but super bubbly! Like I said...this will take anywhere from 5 days to 2 weeks. Just keep going, the end-result is totally worth it!
Here's the science behind what you are doing
Yeast occurs naturally in flour and in the air. You are encouraging yeast growth by making conditions optimal...giving it a warm moist environment and new food every day. Yeast cultures grow and divide making a whole colony of little yeasty beasties. The more you divide, dump, and feed, the more the yeast will continue to multiply. Don't gross out...commercial yeast is merely cultivated yeast that has been dried and packaged, we eat live cultures in yogurt and cheese and many other foods. This kind of stuff is really good for our digestive system. You should celebrate when you've caught enough yeast to make your starter bubble to a froth.

However, I have to admit, I grossed out at the process a little in the beginning...but quickly got over it when I read that when you catch proper yeast cultures, they actually battle bad bacteria and nudge them out of the picture. They like to keep company with their own kind...and that is friendly bacteria and good yeast.

Okay, you have a good starter, Now What?
Name your starter, I call my liquid starter Fred...and I keep a second starter in dough form and call her Ginger (I'll talk a little more about dough form starters later.) Call yours whatever you want...you created your little Frankenstein, it deserves a name! From here on out, I will refer to my starter as Fred or Ginger...Fred being a 1 to 1 ratio flour /water starter, and Ginger being a 2 to 1 flour /water dough form starter. I don't always have both going, as over time, Fred has become my favorite to use, and sometimes I divide him out to make a Ginger out of him.
Taking Care of Fred and Ginger
Okay…once you have your active sour dough culture, you will have to keep it alive. If you have been successful catching good yeast cultures on your kitchen counter, your starter is now ready to upgrade to a home in the refrigerator. You also need to continue feeding it —like you would with any live creature. Fortunately, sour dough food is easy to come by. More flour and more water.
When I'm actively using Fred (my 1 to 1 ratio flour to water starter), I try to feed him once or twice a week with equal parts water and flour. That means on Sunday I feed him one cup of flour, and one cup of water…then I repeat that on Wednesday. I always feed my starter the night before I make bread or make waffles...you always want your starter in an active bubbly, yeasty-smelling state when you use it, not a hungry state where it smells sour and bubbles are hard to find. To feed it, just dump out half the starter, then add one cup water, and one cup flour and let Fred sit out overnight on the counter then return to the fridge the next day. Realistically, feeding your starter 2 times of month will keep it up just fine! It's pretty hard to kill.
When I am not actively using Fred, he becomes very hungry and needs a little TLC. I will be the first to admit I've ignored him for up to 4 months sitting in the back of my fridge (this is not a habit, but it has happened once.) When this happens, don't be alarmed when you take off the lid to your starter and find a layer of clear dark liquid on top, and a very strong smell of alcohol. This is called hooch in the sourdough community, and there is nothing wrong with it. It develops when your starter has not been stirred or fed regularly. However, if you find red, pink, or totally black mold, then that is another story altogether. You'll need to throw it out. This is a sign of your starter dying or decaying. Hooch is just flour that has turned into alcohol and separated from the start, I don't recommend drinking this, but you can stir it back into the starter. I prefer to dump it off the top, then proceed with feeding my starter. I will usually do two or three feedings over 2 days before I start using it again. Instead of dumping out half the starter then adding a feeding...I just take a tablespoon out of the center of the starter and add it to 1 cups flour and 1 cup water. On the next feeding I dump out half and then add another cup water and another cup flour. You will know when it is active again when it starts bubbling and frothing. The good news is, that if you continue to feed and stir your dough regularly, you will likely never see mold. Sour dough starters are rumored to be better the older they are. Fred and Ginger were born sometime at the end of April 2008.
Whenever you know that you will need a larger amount of starter, you can add more than one cup water and one cup flour to your starter, and it will grow and multiply making a large batch of starter. If your ratios of flour and water ever go off a bit, no worries...it won't ruin a thing...just try stirring a little more water or flour in it to make it the right consistency.
One time, I accidently used all my starter up...I was devastated...until I looked at my starter crock and saw that there was still starter clinging around the edges of the crock, so I just added two cups flour and two cups water to my crock, and stirred it up, and within 4 hours it was all bubbly again. So even the smallest amount of active starter can be made into larger amounts if needs be!
I feed Ginger (dough starter once a month 2 parts flour 1 part water). She is less temperamental and more stable. I feed her a ratio of 2 to 1…that means 1 cup flour, ½ cup water. I will knead her in my mixer with the flour feeding, but not too long, as she tends to get stickier than taffy if I do--something about the flour breaking down in the starter. I just make sure I incorporate the flour enough to see it go away, and the dough isn't too lumpy. You can add more flour if you want a stiffer dough start.
The only reason I keep a second starter around is fear that I will accidently use up all of my starter and rinse out the crock before I realize that I didn't refresh it and make more. You can freeze a back up dough starter for emergencies too! Dough starters are also the base for many recipes. However, You can always make your dough starter into a liquid starter and vice versa by changing the proportions of your next feeding. Some say dough starters have a little more of a sour flavor. That is originally why I kept a dough starter in the first place. However, I find that my liquid starter has plenty of sour flavor all on its own. That's why I just keep a Fred in the fridge right now.
Helpful Tips in caring for your starter:

Always cover starters LOOSELY! They emit gas that could explode a sealed jar as there is no room for it to expand. I love to use kitchen crocks, and remove the rubber gasket...some people use canning jars with cheesecloth and a metal ring in place of the metal lid…some people use good old fashioned saran wrap…you can get creative here…just don't seal it shut in an air tight container.
After feeding either Fred or Ginger, I let them hang out on the countertop for 12ish hours. This is not exact science…as you could feasibly forget about your starter until the next feeding in a few days without refrigerating. Anyway…the room temperature gives the starter a chance to really get warm and cozy with their new food. The starter will expand to triple or even quadruple its original size…so plan your containers accordingly. I then refrigerate my starters as they do better refrigerated.
I would refresh a starter that showed signs of not being healthy. Healthy liquid starter bubbles and brews shortly after feeding it (like an hour after.) Healthy dough starter starts to rise up within 3 or 4 hours of a feeding. If your starter is weak, you will not see this kind of activity, and it will act dead. You will nee to give it a double feeding.
A starter that just won't cooperate sometimes needs a few specialty feedings to perk it up. If your starter is not bubbling a few hours after feeding it, you can try adding freshly ground whole wheat flour or rye flour to your start to encourage yeast growth. The wheat bran usually has more yeast on it than the white center of the wheat. It will help fortify your yeast colony any time it needs a boost. Also, if you want to convert your starter to a whole wheat starter, then simply start feeding wheat flour instead. You can always convert back later by adding white flour.
What do I do with it now that I have one?
You get to bake and impress all your friends and family! They will worship you as a bread-making goddess. When they catch a sniff of the bakery smells that waft from your home, they will come running to your home with excuses just to come inside and hopefully sample your bread, muffins, waffles or moist cakes. So here we go...here are two family favorite recipes to get you started.


Sourdough Waffles (with pancake adaptation in notes)
I like to suggest an easy foolproof way to use your new starter before we get onto French bread. We all love waffles...if you don't, you haven't tried these yet. These are so light and fluffy and have a nice crispy outside.
Ingredients:
1 cup milk
1 cup starter
1 1/2 cups flour (white or wheat is great)
2 Tablespoons brown sugar (you substitute use honey or white sugar--just not artificial as you need this to properly feed the starter overnight)
1 teaspoon salt
After dinner or before you go to bed, mix all the above ingredients well in a large bowl. Let sit on the counter overnight.

In the morning add the following:
1/2 c melted butter (not too hot...you don't want to kill the yeast I usually cool the butter off with the eggs)
2 eggs
1/2 teaspoon baking soda

incorporate the above ingredients well into the sourdough mixture. Don't worry about over-stirring this waffle batter. It is a yeast based batter so it doesn't get tough...in fact a little extra mixing is good.
Now pour batter into a hot waffle maker. We make about 8 large Belgium waffles with this recipe. It is my favorite waffle recipe by far. It is never dense and has a mild sourdough flavor which offsets the syrup nicely.
Notes: If you want to convert the recipe into pancakes...just cut the amount of butter in half.
Sourdough French Bread

Tools:
brick stone for baking the bread on...you can use a cookie sheet, it just won't give the same amount of rise or a really crusty bottom (I use a round pizza stone from Pampered Chef--they make several shapes and sizes...there are many manufacturers...make sure it is stoneware, not clayware.)
a good bread mixer
a bowl
a spray bottle for water
a cake pan that you don't mind water deposits on
The night before making bread, feed your starter a double feeding. (2 cups flour 2 cups water) In the morning, it should be nice and frothy.
A little about timing: Get going on your bread first thing if you want bread for dinner that night. If you want bread for breakfast the next day, just start in the afternoon, and do your first rise in the fridge (so that your bread doesn't culture too quickly), and your second rise on the counter before you go to bed.
Now For the dough:
2 1/2 cups unbleached bread flour
1 1/2 teaspoons salt
3/4 cup starter
3/4 cup water
Pam or Cooking oil (to grease the bowl)
You will notice no yeast is used in this recipe...that is because it is not required if you use a good sourdough starter. The starter IS your yeast! If you are working with a brand new starter that is less than a couple of months old, you may opt to add a 1/2 teaspoon of yeast to boost your bread a bit as a young starter will not create a high loaf. I use no yeast at this point, as it does give your bread a different flavor, as your starter matures, try forgoing any yeast boosts.

Add all ingredients to a good mixer starting with your liquid ingredients at the bottom and salt on the top. (I use a Bosch, a Kitchenaide will work fine too.) Knead the bread for 2 minutes. If you are a bread maker, you may notice your dough is too stiff or too sticky...adjust accordingly at this point with a little bit of flour or water. The dough should be a soft dough, but not sticky, and not too firm. When you press your finger in, it should dent easily, but your finger should not stick. Make any necessary adjustments or none, then knead bread another 5 minutes in the mixer.
Put the dough into a bowl 3 times the size as the dough and cover with saran wrap, then let rise for 4 or 5 hours. Or in the fridge for 12 hours (see note at the top of the recipe...you can make adjustments to rise time and whether or not to use the fridge for timing your loaf for optimal freshness at time of serving.)

Next, shape a round loaf by pulling the dough from the sides to the back so that one side becomes round then tuck your pulls on the back side. (if you have ever made dinner rolls, this is like making one very large dinner roll.) Place dough with smooth side down, in a WELL oiled bowl that is roughly twice the size of the dough ball. You can also choose to flour the outside of your dough ball to ensure that it doesn't stick. Make sure to oil the entire inside of the bowl as we will be using this to mold our bread and dump onto our stone. Let rise for another 4 or 5 hours.
A half hour before you want to cook your dough, place a 9 X 13 inch pan filled 3/4 with water and place on the bottom rack of your oven. Place a brick or stone into your oven on your center rack. Then turn your oven onto 400 F to preheat. You may notice steam coming out of your oven from the vents. You can loosely cover the vents with kitchen towels to catch the steam. When the oven and the stone is preheated, carefully open the oven door keeping your face back as you do not want a surprise hot steam facial. As the steam clears a bit (usually like 2 seconds) then remove the heated brick stone.


Working quickly, invert your dough onto the hot stone. This is kind of a rolling action...I place one edge of the bowl on the stone and let the dough roll out. If you do this correctly, the dough will be smooth side up on the baking stone. Now cut slashes on the top of the dough with a razor blade or a sharp sarraded knife. Quickly move dough to oven, then carefully spray the top of the dough with warm water...trying not to spray the stone (you don't want the stone to get cold water on it or it will crack.) Bake in the oven for 25 to 30 minutes...the bread will be a nice light crusty brown. Remove bread from stone and place on a cooling rack to ensure a crusty bottom.

Science behind all these crazy steps:
The hot stone will shock the dough into a quick rise with instant heat. Slashes in the top of the loaf will allow for more expansion of the dough. Spraying the top of the loaf will allow the dough to stay soft in the oven as long as possible preventing crust to form too soon...allowing more rise. This will also help in creating the perfect French bread crust with a crispy chewy texture that has a glossy bubbly finish on top. The steam pan in the oven encourages the dough to stay soft for as long as possible. Every little step allows for more rise...and each step makes a difference.
Last note of encouragement:
I hope this post was helpful...not intimidating.
It sounds like so many steps...but once you get the hang of it...it really amounts to feeding your starter the night before making something (total time less than 2 minutes.) Making dough in the morning (about 15 minutes.) Reshaping a loaf at lunchtime (2 minutes.) Turning on the oven and setting it up (5 minutes) and baking the bread. The other stuff in between all of that is the why how and the what--it's all important stuff to know...but after you know it, you can just tuck it away, and carry on with making your fancy schmancy impressive Sourdough French bread.
I hope this sparked a seed in some of you to become artisan bread bakers yourselves!