Ads 468x60px

Showing posts with label fabric. Show all posts
Showing posts with label fabric. Show all posts

Sunday, February 02, 2014

Sketching on Fabric by Diana


Hi! Diana Fisher here today to show you how you can use your sketch pens on fabric paper for an easy project. 

I will insert a warning that the sketch pens for the Silhouette are not meant for fabric — the design will wash off in the washing machine. But, if you used the pen holder for the Silhouette and a fabric marker, this project would be resistant and washable. 

If you aren't going to be washing the item (like a tote bag) you don't need to worry about it being washable.

So, let's get started! First, you want to select your design. I chose this XO heart cut from Samantha Walker. You can see that I sized it to the top left corner and selected "sketch pen" in the right sidebar after I selected the "Send to Silhouette" icon in the top navigation.


I used an adhesive-backed fabric to sketch onto for my design. The sketch pens went on cleanly and didn't smudge. Since I'm only using this T-shirt for a quick Valentine's Day photo shoot, I'm not too worried that my design will wash off.


After it sketches, I will leave the mat in the Cameo. Do not remove it! You want everything to still be lined up. Moving even an eighth of an inch to the left or right if you have to put the mat back in can change the whole project.

Going back to the Silhouette software, select the Trace option from the Object menu. Choose Select Trace Area from the right side bar and then highlight your heart.


Once you have chosen the heart, trace using the Outer Edge option. You will get a second heart that is only the outside heart and not the inside XO detailing.


Using the shift key to keep it from scaling too far right-left or up-down, expand the outer heart to be just outside the heart you sketched. Delete the inside heart leaving only the single, plain heart.


Now you can switch the sketch pen back to a cutting blade. Select the "Send to Silhouette" option again and this time choose to cut it. I chose a fabric setting pre-set but then increased the pressure to 4 because of the adhesive backing. 

Once that is set and cut, you'll notice you now can remove the cutting mat from your Cameo and peel your sketched and cut heart from the mat. Time to apply it to a T-shirt (or tote bag). 


Remove the backing from your fabric. Place a piece of fabric or a dish cloth over your design, and using a warm iron adhere your design to your shirt or tote bag.  


To further secure it, stitch around the edges of the design. This will keep any edges from peeling away.


The final step is to find a cute model to show off your work! A special thanks to my little guy for always being so willing to help show off my project ideas. 

Saturday, September 28, 2013

Quick and Easy Fabric Memo Boards by Claudia Harvey

Hello everyone. Claudia here. I am so excited to share this project (and tutorial) with you today.

Fabric Memo Boards
I knew exactly what I was going to do with these adorable fabric quarters from Samantha's Serenata Collection when I received them; I had been wanting to make my own memo boards for a long time.

These are my supplies:
First thing I did was find a plate that was slightly larger than the cork boards; I wanted it to be an inch to an inch and a half larger to ensure that it would cover over the edges of the board.
Next, I grabbed my glue gun and work my way around to secure the fabric on the backside.

Finally, I used Command strips to hang them up on the wall. Have you ever used those? I love them! I use them for just about anything I need to hang. They were perfect for these. Oh, and in case you wonder, the round cork boards are from Ikea.

That's it! It really was quick and easy.

Now the only thing I haven't decided is if I am going to use them as memo boards or decoration; they look great just the way they are hanging now, don't you think?

other products and tools used to make this project:

Until next time.

Lots of happy hugs, 

Friday, May 31, 2013

Silhouette Fabric Promotion - Last Day!

Today is the last day to take advantage of the current Silhouette promotion! 
Click on the image below to order and be sure to use the 
code SAMANTHA to get these deals!


Thursday, May 23, 2013

Silhouette Portrait Giveaway!

Good morning and happy Thursday!  
Today we are back with another fabulous giveaway sponsored by Silhouette!

All you need to do is enter below. You can earn multiple entries by following us on Facebook, commenting below, tweeting about the giveaway, and signing up for email updates. This giveaway is open to US customers only.





You are going to love all that you can do with your 
Silhouette and these fabric interfacings!

Jamie is sharing an adorable onesie she created using the Dog Puppy Silhouette cut, the Clean Cut Fabric Interfacing, and the Serenata fabric collection!  




Tutorial:
1.  Cut a piece of the Clean Cut Fabric Interface a little smaller than your fabric.  Place the textured side down on the back of your fabric.
2.  Use a hot iron to adhere the interfacing to the fabric.
3.  The back of your fabric should look like this now.
4.  Remove the backing from the interfacing.
5.  Place the fabric on your Silhouette mat.
6.  Insert your Fabric Blade into your machine and load your fabric.

7.  Move your design to match where your fabric is on your mat and then press the "send to silhouette" button.  Change your cut setting to "fabric cotton print" and make sure your blade is adjusted properly.  Press "cut".

 8.  Your Silhouette will cut your design.
 9.  Unload your mat once the cut is complete and remove the fabric.
10. Your cut should look similar to this.  Remove the design from the mat.
11. Place the design on your onesie and place it where you want it.
12. Iron the design on.
13. I used the Clean Cut Fabric Interfacing for my project and then hand-stitched the edges.  If you want to use a machine to sew on your design make sure you use the Sewable Fabric Interfacing.


If you already have a Silhouette, be sure to take advantage of the promotion!  You can get both the Clean Cut Fabric Interfacing and the Sewable Fabric Interfacing plus the Fabric Blade and a $25 download card for just $29.99!
Just click HERE and use promo code SAMANTHA!




Sunday, April 14, 2013

Push Pin Pillow Tutorial by Diana


Hello! Diana here with you today sharing something I made using the Samantha Walker Serenata fabrics from Riley Blake. 

As soon as I saw this blue fabric, I wanted to make a pillow. But alas, we have a new puppy who has taken to eating most of what it laying around the living room, so I settled on making a teeny tiny pillow for push pins that I can keep in my craft room. 

Here are a few quick tips on how you can make one, too!

I have a sewing machine, but I wanted to share with you how you can make one yourself even without a machine using just a needle and thread.


I cut about 1/4 of my fat quarter and grabbed about a fist full of filler stuffing. Then I threaded my needle and got to work sewing up the side with a very simple stitch.

You fold the edges over like you would gift wrap and stitch those edges, too. The backside looks a little bit like a gift wrapped up but with stitches instead of tape. Super simple and should hold nicely over time.


Choose a fun button for the middle and sew all the way through the pillow. You want to make it tight so that the pins will stick. Finish off the back with a knot. I liked to sew through the button once for the right side and again for the left. That way, if your button starts to get loose, you still have one side holding it tight and you can repair it if needed without loosing its shape.


If you are making this for a gift, finish off with a little gift tag. This tag is from the Traditions collection from Carta Bella and the stamp is from JustRite Buntings and Banners. 

There you have it! A cute mini pillow for a gift our yourself using some of your favorite fabrics. 

Friday, October 26, 2012

Natural Therapeutic Hot/Cold Pack Tutorial by Pinky

Hey there friends, 
Pinky here today with a tutorial for Therapeutic Hot/Cold Packs that are all natural and easy to make yourself. Samantha Walker's beautiful Decadence Fabric line makes them perfect for fall or just to make a stunningly styled hot/cold pack. 

Uses for these?? 
Migraines, aches and pains, bed warmers (much larger of course), lovies (in the shape of animals) bread basket warmer- to keep food warm or cold. 
You can freeze them or heat them,just leave in freezer or heat in microwave for 1-2 minutes. 
Step 1. Cut strips of fabric 2-3"X8-16". 
Your choice depending on area you want to apply it to. 
I chose the shorter ones because I will be giving them to a friend who has migraines. 
I made them the perfect size for the forehead.
 Step 2. With right sides facing together, 
stitch sides and bottom making sure to leave opening at the top. 
 Step 3. Snip corners and thread. 
 Step 4. Turn bags right way. 
Step 5. Pour rice into a bowl. Add all natural oil (just a drop or 3 not too much). 
Stir into rice thoroughly.
 Step 6. Funnel rice into bags. (I use a sheet of paper as a funnel). 
Step 7. Stitch ends closed. 
These make wonderful gifts but you cannot wash them.


Related Posts Plugin for WordPress, Blogger...