Ads 468x60px

Showing posts with label valentines. Show all posts
Showing posts with label valentines. Show all posts

Tuesday, February 05, 2013

XO Bag Tutorial by Jamie Cripps

Good Morning!  Jamie back with you today for a quick tutorial 
using Samantha's XO Bag with my Silhouette!

I just love how quick this bag cuts and goes together and it is such a nice size to fit in those Valentine goodies!

Here is a quick tutorial: 
1.  Cut out the XO Bag using your Silhouette then fold on all the score lines.  Note: Make sure to leave this cut up in your software as we will be modifying it a bit later in the tutorial.
2.  Place 1/2" wide tape adhesive down the 1/2" side of the box (shown on the left of this photo).
3.  Remove the adhesive back from the tape then fold the bag over and adhere as shown, pressing firmly to adhere.
4.  Push the side of the box in as shown then tuck the flap into the slot.
5.  For the bottom of the box, place two pieces of adhesive on the short flaps.
6.  Squeeze the box sides then press the pieces together so the overlap each other as shown.
7.  Place adhesive on the long flaps then press down to adhere to the box.
8.  Cut a 22" piece of wired ribbon.
9.  Tie the ribbon around the handle of the bag so that you have equal parts of the ribbon on both sides of the middle knot.
10.  Tie a bow as you normally would then play with the bow parts to "fluff" them.  Fold the ribbon ends in half then trim at an angle as shown.
11.  Even out the ends of the box so they lay nicely.
12.  Add a piece of twine around the bow then tie.

To change the color of the X and O strip across the bottom of the bag you will need to make another cut with your Silhouette.

Make sure you have the same file up that you cut with so the sizes will remain the same.  Click on the bag to select then right-click and choose "Ungroup".

Your cut file will now look like the image above.


Click on the outer area of the bag to select it as shown in the photo.  Press delete to remove the bag shape.


Click on the XO strip and move it toward the bottom of your mat.



Drag your mouse around the remaining pieces to select them and then press delete to remove the cuts from the mat.  Make sure not to remove the XO strip.

Once you have the strip on its own, you can move it to the area of the mat you want it and then place a red cardstock strip in the coordinating area on your 'real' mat.  Then cut the piece as you normally would.

Before you adhere the XO strip make sure you line up the thicker edges of the X's on the bag and XO strip so that you place adhesive on the correct side!

I love how easy it is to change up the color on the bag by doing this simple tutorial!

Thanks so much for stopping by today!


Get Amazon Prime Membership! Enjoy Free 2-day Shipping on Prime products, plus access to Free digital content like videos, books, and more!

Tuesday, January 29, 2013

Heart Lace Clam Shell Box Tutorial by Maya

Who doesn't like cute packaging?
Hi, it is Maya here, sharing with you a tutorial for making an adorable heart lace box. It has a sweet lace heart design on the top and a fancy corsage tab on the bottom. It looks great as is, but with few small additions it can be uniquely personalized.

Let's start! First, open the Samantha Walker Heart Lace Clam Shell Box cut file in the Silhouette Studio software.



To add a monogram to the box top do the following:
1. Click on the text tool, change the font to Storybook and type the letter you would like to use.
2. Move the monogram to the center of the heart, select the box and the letter, open the Align window and click on Align Center under Align Horizontally option to make sure the monogram is perfectly centered. 
3. Click on Group to bind the design together.



At this point of time you can cut the design. This will give you approximately 3"x3" box (when measured in the widest part). I wanted to make the box a little bigger, so I rotated the design to fit the diagonal of my canvas and enlarged it to 110%. This will make 3"3/8'x3"3/8' box.



Cut the design. The following steps are completely optional. I wanted to add a different color under the lace heart and to the corsage. Do the following to create separate cuts for the corsage tab and the box top.
1. Rotate the design back to the original position and use the knife tool to separate the corsage tab from the rest of the design.



2. Move the corsage edge aside and add the straight edge with the line tool. Group both edges together. 



3. Use the Rectangle tool to draw a rectangle around the heart following the perforation lines. Scale it down to 98% to make sure it will fit inside the box cover. 



4. Delete everything from the canvas except the square and the corsage tab.  Cut them out. I used glitter cardstock to add a little shine to the box. Any contrast color will look great.


Assembly Instructions



Fold all perforated lines. The corsage tab should be folded in the opposite direction that other folds.



Add strong adhesive to the back of the box top and to the corsage tab.



Adhere the gold square to the box cover glitter side down and to the corsage tab glitter side up.


Add strong adhesive to the tabs.    


Assembly the bottom part of the box



Assembly the top part. Close the box and admire.     



That's it! Perfect for Valentine's Day.
 
 

The red box in the center is cut using original dimensions, two others were enlarged to 110%.
Maya 


Get Amazon Prime Membership! Enjoy Free 2-day Shipping on Prime products, plus access to Free digital content like videos, books, and more!

Monday, January 28, 2013

New This Week! January 28, 2013!


Happy Monday!
New this week at Samantha Walker's Silhouette die cut store...




If you didn't catch them already, these little Valentine Cuties 
popped into the store last week!




 Please note, designs may not be up in the store at the beginning of the week, but they have been uploaded to the queue. Watch for them as the queue rolls out the new designs! 

Sunday, January 27, 2013

Valentine box by Diana


Hi! Diana here with you today to share with you how easy it is to make this lovely Valentine's gift box. I used the Cameo and studio files to create this with only card stock I had on hand and some buttons.

For the box, I used Samantha Walker's 3D Box Heart Handle studio file. Below are the settings I used to cut a medium-weight card stock with a slight grainy texture on one side of the paper.


For the decor on the box, I used a mix of Samantha Walker's Leaf Border and a portion of the flowers in the 3D Decorative Flowers. Both of these were sized to fit the box, ungrouped, duplicated and each put on one side of the cutting mat. I put pink paper on the left side and white paper on the right. Doing this saves paper and time setting up multiple files.


Once it was cut, the box was easy to assemble. In fact, I just put the tabs into the provided slots and didn't even use any adhesive!


Up close you can see the detail in the more intricate cut of the leaves. Even at 2 inches, the leaves cut perfectly!


I hope this inspires you to make a cute gift box for Valentine's Day for someone special!



Get Amazon Prime Membership! Enjoy Free 2-day Shipping on Prime products, plus access to Free digital content like videos, books, and more!

Saturday, January 26, 2013

Round Top Box Tutorial by Aimee Maddern

Hi!  It's Aimee and today I am sharing a tutorial for the 
Round Top Box Digital Cut File from Silhouette or in SVG cut file format 

-->

I only have a 12x12-cutting mat so I ungrouped the pattern and made it 2 separate cuts. The handle, box and heart windows I cut from red cardstock. The lid and side panels I cut from kraft cardstock.



 
-->
1.     Take all your pieces and fold



 
-->
2.    Glue box together, I used glossy accents, squeeze a small amount of glossy accents 
{or adhesive of choice} on the folded tab. Hold till adhesive is dry, repeat till all four sides have been adhered.






4. You now have the base of your box, then I inked all my pieces *optional


5.     Center the side panels onto the box base, leaving a ring of red showing, and adhere.






6.     Take the lid roll around glossy accents bottle or something round 
{this is to train the lid, and keep it round}



7.     Glue handle together {do not glue below score lines}


8.     Stick handle through the top cuts in lid.


9.     When handle is through the lid fold over the bottom of the handle {below score lines}
  adhere the bottom of the handle to the underside of the lid.


10. Dab each tab on the side of the lid with adhesive


11. Adhere heart window to the lid {tabs} hold each tab while glue dries 




12. Place lid on box and add embellishments.






Related Posts Plugin for WordPress, Blogger...